Description

GE DS200LPPAG1AAA

Overview

The GE DS200LPPAG1AAA is a high-performance industrial control module developed by General Electric (GE), designed for complex automation and power distribution systems. As a key component of GE's classic DS200 series, this module integrates reliable hardware architecture and advanced power management technology, serving as a critical interface for power regulation and system coordination in industrial applications such as power generation, manufacturing, and process control.

Technical Parameters

1. Power Specifications

Input Voltage: 24V DC (±10% tolerance)
Output Voltage: 0-10V DC (analog) / 24V DC (digital)
Power Consumption: ≤15W

2. Electrical Parameters

Power Channels: 8 analog input channels / 16 digital I/O channels
Communication Interfaces: RS485 (Modbus RTU), Ethernet (Modbus TCP/IP), CANopen
Frequency Response: 0-20kHz
Control Accuracy: Voltage: ±0.5% / Current: ±1%

3. Environmental Specifications

Operating Temperature: -40°C to +70°C
Storage Temperature: -55°C to +85°C
Humidity: 5%-95% (non-condensing)
Protection Level: IP20
Dimensions: 140mm × 100mm × 45mm
Weight: Approximately 0.9kg

Functional Features

1. Precise Power Regulation

Supports real-time monitoring and regulation of power parameters (voltage, current, power factor), enabling stable power supply for industrial equipment and optimizing energy efficiency.

2. Flexible Communication Capability

Compatible with industry-standard protocols (Modbus, CANopen, etc.), allowing seamless integration with PLCs, SCADA systems, and HMIs for remote power management and real-time data exchange.

3. Robust Protection Design

Built-in overvoltage, overcurrent, and short-circuit protection safeguards against power system faults. Opto-isolated channels prevent electromagnetic interference, enhancing system reliability.

4. Hot-Swappable Design

Enables module replacement without system shutdown, minimizing downtime. The standardized structure supports easy expansion of power management capacity to meet evolving production needs.

Operation Guide

1. Installation

Mount the module on a DIN rail or control panel with power off.
Connect 24V DC power supply to the designated terminals, ensuring correct polarity.
Wire power signal inputs and I/O channels using shielded cables to minimize interference.

2. Configuration

Use GE's dedicated software (e.g., Proficy Machine Edition) to set parameters via RS485 or Ethernet.
Configure power regulation modes, communication protocols, and I/O mapping based on application requirements.

3. Commissioning

Power on the system and check status LEDs: green for normal operation, red for fault.
Perform power parameter calibration to verify voltage and current measurement accuracy.

4. Routine Maintenance

Regularly clean the module's heat sink to prevent dust accumulation.
Monitor input voltage stability and check for loose terminal connections.
Update firmware periodically via GE's official platform to ensure optimal performance.

5. Fault Handling

Refer to front-panel LED fault codes (e.g., E002 for overcurrent) and follow troubleshooting steps in the manual.
Contact GE technical support with fault logs for persistent issues.