Description
ABB PM554-TP-ETH 1SAP120600R0071
The ABB PM554-TP-ETH 1SAP120600R0071 is a high-performance industrial control module developed by ABB, specialized in complex automation systems. As a key component of ABB's control product portfolio, this module integrates reliable hardware architecture and advanced control algorithms, serving as an interface for system communication and functional coordination in industrial applications such as power generation, manufacturing, and process control.
- Input Voltage: 24V DC (±10% tolerance)
- Power Consumption: ≤15W
- Voltage Protection: Transient overvoltage suppression
- Ethernet Interfaces: 2 × 10/100 Mbps (RJ45, support for Modbus TCP/IP, Profinet, etc.)
- Serial Ports: 1 × RS485 (Modbus RTU)
- Wireless Option: Optional WiFi module (802.11b/g/n)
- CPU: 32-bit ARM Cortex-A53, 1.2GHz
- Memory: 512MB RAM / 4GB Flash
- Data Processing Rate: Up to 1000 I/O operations per second
- Operating Temperature: -25°C to +70°C
- Storage Temperature: -40°C to +85°C
- Humidity: 5%-95% (non-condensing)
- Protection Level: IP20
- Dimensions: 120mm × 100mm × 50mm
- Weight: Approximately 0.6kg
Dual Ethernet ports support real-time data exchange with PLCs, SCADA systems, and HMIs, enabling seamless integration into complex automation networks. Protocols like Modbus and Profinet ensure compatibility with diverse industrial devices.
The high-performance ARM processor enables real-time monitoring and control of industrial parameters, supporting advanced algorithms for logic control, data analysis, and fault diagnosis.
Built-in overvoltage, overcurrent, and ESD protection safeguards against transient faults. The module withstands harsh environments with high temperature, humidity, or electromagnetic interference.
Standardized architecture allows easy integration with additional I/O modules or communication interfaces, adapting to evolving production requirements.
- Mount the module on a DIN rail or control panel with power off.
- Connect 24V DC power supply to the designated terminals, ensuring correct polarity.
- Wire Ethernet/serial cables using shielded connectors to minimize interference.
- Use ABB's dedicated software (e.g., Control Builder M) to set parameters via Ethernet.
- Configure IP addresses, communication protocols, and data mapping based on application needs.
- Power on the system and check status LEDs: green for normal operation, red for fault.
- Test network connectivity and perform data transmission tests to verify communication stability.
- Regularly clean the module to prevent dust accumulation.
- Monitor power supply voltage and check for loose connections in terminals.
- Update firmware periodically via ABB's official platform to ensure optimal performance.
- Refer to front-panel LED fault codes (e.g., E002 for network failure) and follow troubleshooting steps in the manual.
- Contact ABB technical support with fault logs for persistent issues.
![]()
